Model Resin Material Safety Data Sheet (MSDS)
This article provides detailed material safety information, ingredients and usage recommendations of Model resin.
- Dental Resins
- Jewelry Resins
- FAQs
-
Profile Settings for 3D Printers
Anycubic 3D Printers Settings Phrozen 3D Printers Settings Elegoo 3D Printers Settings Flashforge 3D Printers Settings Wanhao 3D Printers Settings Epax 3D Printers Settings Longer 3D Printers Settings Creality 3D Printers Settings Nova3D Printers Settings Peoply 3D Printers Settings Zortrax 3D Printers Settings
- Digital Jewelry Production
- Digital Dental Production
- Blog
Model Resin Material Safety Data Sheet
SECTION I: Intended Use
1. Intended Use
Dental Model Resin is a dental resin developed to work compatible with DLP devices and silicone tanks. It has been developed as an alternative to the traditional intraoral plaster molding method. Dental Model Resin is compatible with 385 and 405nm 3D printer devices.
SECTION 2: Hazards identification
2.1 Classification of Substance and Mixture
Labeling in accordance with the "Regulation on Classification, Labeling and Packaging of Substances and Mixtures" (SEA) published in the Official Gazette dated December 11, 2013 and numbered 28848.
H315 - Skin Abrasion/irritation, Hazard Category 2
H317 - Sensitization - Skin, Hazard Category 1, 1A, 1B
H319 - Serious Eye Damage / Eye Irritation, Hazard Category 2
H411 - Harmful to the Aquatic Environment - Chronic Hazard, Category 2
H412 - Harmful to the Aquatic Environment - Chronic Hazard, Category 3
2.2 Labeling in
Accordance with the "Regulation on Classification, Labeling and Packaging of Substances and Mixtures" (SEA) published in the Official Gazette
dated December 11, 2013 and numbered 28848.
Sign of Harmfulness: GHS07, GHS09
Warning word: Caution
Harmfulness Statement:
H315 - Causes skin irritation.
H317 - May cause allergic skin reactions
H319 - Causes severe eye irritation.
H411 - Long lasting, toxic effect in aquatic environment.
H412 - Long-lasting, harmful effect in aquatic environment.
Precautionary Statements:
Precautions
P261 - Avoid inhalation of dust/fume/gas/mist/vapor/spray.
P264 - Wash thoroughly with ... after handling.
P272 - Contaminated clothing should not be allowed to leave the work area.
P273 - Avoid release into the environment.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
Intervention
P302+P352 - IN CASE OF CONTACT WITH SKIN: Wash with plenty of soap and water.
P333+P313 - If skin irritation or itching occurs: Get medical advice/attention.
P321 - Special treatment required (see label)
P362+P364 - Remove contaminated clothing and wash before reuse.
P332+P313 - In case of skin irritation: Get medical advice/attention.
P305+P351+P338 - IN CASE OF CONTACT WITH EYES: Rinse carefully with water for several minutes. Remove contact lenses if worn and easy to do so. Continue rinsing.
P337+P313 - If eye irritation persists: Get medical advice/attention.
P391 - Collect spillage.
Disposal
P501 - Dispose of waste/container at hazardous or special waste collection points.
2.3 Other hazards
No additional information.
SECTION 3: Composition / Information on Ingredient
3.1 Substances
Not applicable.
3.2 Mixtures
Name |
Identity of the substance/mixture |
% |
Classification in accordance with the "Regulation on Classification, Labeling and Packaging of Substances and Mixtures" (SEA) published in the Official Gazette dated December 11, 2013 and numbered 28848 |
---|---|---|---|
Epoxy Methacrylate Oligomer |
(CAS number) 1565-94-2 |
65-70 |
|
2-Hydroxyethyl methacrylate |
(CAS number) 868-77-9 |
15-30 |
Skin Irritation Category 2, H315 Eye Irritation Category 2, H319 Skin Sensitivity Category 1, H317 |
Triethylene glycol dimethacrylate |
(CAS number) 109-16-0 |
15-30 |
Skin Sensitivity Category 1, H317 |
Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide |
(CAS number) 162881-26-7 (EC number) 015-189-00-5 |
1-5 |
Reproductive toxicity Category 2, H361f Chronic water toxicity Category 3, H412 |
Inhibitor |
- |
1-10 |
Serious eye damage/eye irritation Category 2, H319 Skin sensitization Category 1, H317 Chronic water toxicity Category 2, H411 |
Full text of H statements: see Section 16
SECTION 4: First aid measures
4.1 Description of First Aid Measures
General first aid measures: If you feel unwell, seek medical advice/attention.
First-aid measures in case of inhalation: Remove the person to fresh air and allow him/her to breathe freely.
First-aid measures in case of skin contact: Rinse skin with water/shower. Immediately remove all contaminated clothing. In case of skin irritation or itching: Get medical advice/attention.
First-aid measures in case of eye contact: Rinse carefully with water for several minutes. Remove contact lenses, if present, and easy to remove. Rinse continuously. If eye irritation persists: Get medical advice/attention.
First-aid measures in case of ingestion: If you feel unwell, call the poison center or doctor/physician.
4.2 Significant acute and subsequent symptoms and effects
Symptoms/effects in case of skin contact: Irritant. Causes allergic skin reactions.
Symptoms/effects following eye contact: Eye irritation.
4.3 First signs of the need for medical attention and special treatment
Treat symptomatically.
SECTION 5: Fire-Fighting Measures
5.1 Fire extinguishers
Suitable extinguishing agents: Water spray. Dry powder. Foam. Carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Non-flammable.
5.1 Recommendations for fire-fighting teams
Protection in case of fire: Do not attempt to intervene without appropriate protective equipment. Self-contained breathing apparatus. Complete protective clothing.
SECTION 6: Precautions against Accidental Spillage
6.1 Personal precautions, protective equipment, and emergency procedures
6.1.1 For non-emergency personnel
Emergency plans: Ventilate the spill area. Open flames, sparks, and smoking are prohibited. Do not breathe dust/fumes/gas/mist/vapor/spray. Avoid contact with skin and eyes.
6.1.2 For emergency responders
Protective equipment: Do not attempt to intervene without appropriate protective equipment. For further information see section 8: "Exposure controls/personal protection".
6.2 Environmental Precautions
Avoid release to the environment.
6.3 Methods and materials for preservation and cleaning
Cleaning operations: Collect liquid spillage with absorbent material. Notify authorities if the product enters sewers or municipal waters.
Other information: Dispose of material or solid residues at an authorized facility.
6.4 References to other chapters
For further information see Chapter 13.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Precautions for safe handling: Ensure good ventilation in the work area. Wear personal protective equipment. Do not breathe dust/fumes/gas/mist/vapor/spray. Avoid contact with skin and eyes.
Hygiene measures: Wash contaminated clothing before reuse. Do not take contaminated clothing outside the workplace. Do not eat, drink or smoke while using this product. Always wash your hands after handling the product.
7.2 Conditions for safe storage, including incompatibilities
Storage conditions
Store in a well-ventilated area. Keep the container tightly closed.
More information on storage conditions
Store in a dry and well-ventilated place, away from foodstuffs, in the original packaging only. Keep away from any light. Since the stability of the product depends on the presence of oxygen (air), an inert gas blanket should not be applied.
7.3 Specific end use(s)
For use by trained specialist personnel.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
No supplementary information.
8.2 Exposure controls
Appropriate engineering controls: Ensure good ventilation in the work area.
Personal protective equipment: Gas mask. Gloves. complete flame-resistant protective clothing. Safety goggles.
Hand protection: Protective gloves
Eye protection: Protective goggles
Skin and body protection: Wear suitable protective clothing
Respiratory protection: In case of inadequate ventilation, wear suitable respiratory equipment.
Environmental exposure controls: Avoid release into the environment.
SECTION 9: Physical and chemical properties
9.1 Knowledge of basic physical and chemical properties
Physical state: Liquid
Appearance: Liquid
Color: Opaque Pink
Odor: No data available
Odor threshold: No data available
pH: No data available
Relative evaporation rate: No data available
Melting point: Not applicable
Freezing point: No data available
Boiling point: No data available
Flash point: No data available
Spontaneous ignition temperature: No data available
Decomposition temperature: No data available
Flammability (solid, gas): Not applicable
Vapor pressure: No data available
Relative vapor density at 20 °C: No data available
Relative density: No data available
Resolution: No data available
Log Pow: No data available
Viscosity, kinematic: 200-225 mPa.s at 23°C
Viscosity, dynamic: No data available
Explosive properties: No data available
Oxidizing properties: No data available
Explosive limits: No data available
9.2 Other Information
No supplementary information.
SECTION 10: Stability and reactivity
10.1 Reaction
It is stable under normal conditions.
10.2 Chemical stability
Stable under normal conditions.
10.3 Possibility of Hazardous Reactions
No known hazardous reactions under normal conditions of use.
10.4 Conditions to avoid
Ultraviolet light and sunlight initiate the polymerization of the product. Therefore, store only in tightly closed containers, away from any light source at 15°C - 28°C / 59°F - 82°F.
10.5 Incompatible materials
No supplementary information
10.6 Hazardous decomposition products
Under normal conditions of storage and use, no hazardous decomposition products should form.
SECTION 11: Toxicological information
Acute Toxicity
Acute toxicity (by mouth): Not classified.
Acute toxicity (dermal route): Not classified.
Acute toxicity (by inhalation): Not classified.
Serious eye damage/irritation
Causes severe eye irritation.
Skin abrasion/irritation
Causes skin irritation.
Respiratory or skin sensitization
Causes allergic skin reactions.
Germ cell mutagenicity
Not classified
Carcinogenicity
Not classified
Reproductive system toxicity
Unclassified.
BHOT-single exposure
Not classified
BHOT-repeated exposure
Not classified
Aspiration harm
Not classified
SECTION 12: Ecological information
12.1 Toxicity
Ecology - general: Long-lasting, toxic effect in the aquatic environment
Chronic aquatic toxicity: Long-lasting, harmful effect in the aquatic environment.
12.2 Persistence and Degradability
No supplementary information.
12.3 Bioaccumulation Potential
No supplementary information.
12.4 Mobility in soil
No supplementary information.
12.5 Results of PBT and vPvB assessment
No supplementary information.
12.6 Other negative impacts
No supplementary information.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Disposal recommendations Do not allow to enter surface water or sewers. Do not allow to enter soil/subsoil. Dispose of waste according to applicable legislation.
Contaminated packaging
Non-contaminated packages can be recycled. Treat contaminated packages in the same way as the substance itself.
SECTION 14: Transport information
In accordance with ADR / RID / IMDG / IATA / ADN instructions
Land transportation (ADR/RID)
14.1 UN number: No hazardous substance within the meaning of this transport regulation.
14.2 Proper UN transport name: No dangerous goods within the meaning of this transport regulation.
14.3 Transport hazard class(es): No hazardous substance in terms of this transport regulation.
14.4 Packaging group: No hazardous substance in the sense of this transport regulation.
Maritime transportation (IMDG)
14.1 UN number: No dangerous goods within the meaning of this transport regulation.
14.2 Proper UN Transport name: No dangerous goods within the meaning of this transport regulation.
14.3 Transport hazard class(es): No hazardous substance in terms of this transport regulation.
14.4 Packaging group: No hazardous substance in the sense of this transport regulation.
Air transportation (ICAO-TI/IATA-DGR)
14.1 UN number: No hazardous substance within the meaning of this transport regulation.
14.2 Proper UN transport name: No dangerous goods within the meaning of this transport regulation.
14.3 Transport hazard class(es): No hazardous substance in terms of this transport regulation.
14.4 Packaging group: No hazardous substance in the sense of this transport regulation.
14.5 Special precautions for the user
No hazardous substances are within the meaning of these transport regulations.
14.6 Bulk transportation in accordance with Annex II of the MARPOL Convention and IBC Code
Not applicable.
SECTION 15: Regulatory Information
15.1 Safety, health and environmental legislation specific for the substance or mixture
Employment restrictions: Respect restrictions on the employment of young people according to the ‘youth age’ job protection guidelines' (94/33/EC).
Water pollution class (D):
3 - highly water polluting
Skin resorption/sensitization:
Causes allergic skin reactions.
15.2 Chemical Safety Assessment
No chemical safety assessment has been carried out for the substances in this mixture.
SECTION 16: Other Information
Full text of H and EUH expressions
Aquatic Environment Chronic 2: Harmful to the Aquatic Environment - Chronic hazard, Category 2
Aquatic Environment Chronic 3: Harmful to the Aquatic Environment - Chronic hazard, Category 3
Eye Irritation 2: Serious Eye Damage/Eye Irritation, Hazard Category 2
Skin Irritation 2: Skin Abrasion/irritation, Hazard Category 2
Skin Sensitizer 1: Skin sensitization, Hazard Category 1
H315 - Causes skin irritation.
H317 - Causes allergic skin reactions.
H319 - Causes severe eye irritation.
H411 - Long lasting, toxic effect on aquatic life
H412 - Long-lasting, harmful effect on aquatic life
Further information
The information is based on our current level of knowledge. However, it does not guarantee product specifications and does not establish contractual legal rights. The purchaser of our product is solely responsible for compliance with applicable laws and regulations.