Prusa SL1
You can use Opague, Dark, Zero and Wax DLP resins with Prusa SL1 3D Printer. Find below printing settings at 50 micron for this resins;
Please note that these settings are provided by customers who are using our resins with Pruse SL1 3D printers so that may cause discrepancies.
Thick Model Settings;
OPAQUE RESIN SETTINGS
| Exposure |
50 micron |
| Initial Exposure |
15 seconds |
| Exposure Time |
100 seconds |
| Layer Height |
0.05 mm |
|
DARK RESIN SETTINGS
| Exposure |
50 micron |
| Initial Exposure |
20 seconds |
| Exposure Time |
100 seconds |
| Layer Height |
0.05 mm |
|
ZERO RESIN SETTINGS
| Exposure |
50 micron |
| Initial Exposure |
20 seconds |
| Exposure Time |
100 seconds |
| Layer Height |
0.05 mm |
|
WAX RESIN SETTINGS
| Exposure |
50 micron |
| Initial Exposure |
15 seconds |
| Exposure Time |
100 seconds |
| Layer Height |
0.05 mm |
|
Thin Model Settings;
OPAQUE RESIN SETTINGS
| Exposure |
50 micron |
| Initial Exposure |
18 seconds |
| Exposure Time |
100 seconds |
| Layer Height |
0.05 mm |
|
DARK RESIN SETTINGS
| Exposure |
50 micron |
| Initial Exposure |
23 seconds |
| Exposure Time |
100 seconds |
| Layer Height |
0.05 mm |
|
ZERO RESIN SETTINGS
| Exposure |
50 micron |
| Initial Exposure |
23 seconds |
| Exposure Time |
100 seconds |
| Layer Height |
0.05 mm |
|
WAX RESIN SETTINGS
| Exposure |
50 micron |
| Initial Exposure |
18 seconds |
| Exposure Time |
100 seconds |
| Layer Height |
0.05 mm |
|